Models 2010-2018 (VAG UDS NEC)

Application note SuperVAG KEY
How to get the new transponder and how to assign it to the car

Required equipment :

  • SuperVAG KEY 2019.2 version or higher
  • Transponder programmer (needed for SMART KEY system)
  • Add-on device SVG149 (needed for situation when All key lost)
  • Online internet connection (needed for SMART KEY system)

Application :

  • Cars VW, Skoda, SEAT – models 2009 – 2012 -2015 (USA -2018)*
    * depends on facelift of appropriate vehicle model

Description:
SuperVAG introduced new methods on learning the keys. There are two different methods on how to add a key (Flip key and Smart key).

Vehicle with flip key

  1. Start by cutting blank keys
  2. Set the communication with the immobilizer system (key programming)
  3. Select Key programming (NO PIN needed)
  4. Check the type of transponder. If SuperVAG says TP22..TP25 needed then program the blank TP48 transponder to appropriate variant (Audi, Volkswagen, Skoda, Seat)
  5. Confirm you have key prepared
  6. Enter the number of keys to be programmed (e.g. 2 or +1).
  7. Follow the instruction in SuperVAG and on dashboard (0-2, 1-2, …)
  8. Set the communication with remote control system (remote programming)
  9. Make sure you have all the car remotes with you
  10. Select Remote control programming
  11. All remotes needs to be programmed together (no +1 option, all non present remotes will be erased)
  12. Check the function of keys and remotes.

Vehicle with SMART key

  1. Cut the blank SMART key first.
  2. Set the communication with the immobilizer system (key programming)
  3. Select Key programming (Kessy)
  4. Check the type of transponder. If SuperVAG says TP22..TP25 needed then program the blank TP48 transponder to appropriate variant (Audi, Volkswagen, Skoda, Seat)
  5. Confirm you have key prepared
  6. Enter the number of keys to be programmed (e.g. 2 no +1 option). All keys need to be programmed at the same time
  7. Follow the instruction in SuperVAG and on dashboard (0-2, 1-2, …)
  8. Program remotes follow instructions displayed in SuperVAG.
  9. Check the function of keys and remotes.

SELECT LANGUAGE