VAG Models 2006 – 2009 (VW New Beetle)

Models 2006 – 2009 (VW New Beetle)

Precoding of transpoder and learning key Required equipment:
· SuperVAG KEY 2019.2 version or higher
· Transponder programmer Application
· VW New Beetle – models 2006 – 2009

Description
There is new regime for learning keys (transponders) introduced by Volkswagen cars. Transponder does not read the car identity during the learning process, but the code (so called Component security) must be stored to the transponder before. You should to use transponder programmer for precoding it. This code (Component security) must be find out from the car. In comparison to other cars 2006-2009, a specific ID must be stored to the transponder, otherwise is it not accepted by immobilizer.   Description: This type of immobilizer has problem to learn a new transponder. The only way is to create a clone of valid transponder. You need to know component security bytes and ID of valid transponder.  
Using of transponder :
· Using of TP48w transponder is necesssary.
· Transponder must be “precoded” by transponder programmer.

Read the PIN and Component security bytes

Find out the PIN and Component security bytes.
In the programm SuperVAG KEY select the appropriate model and set the communication by clicking on Learning key. Wait until the programm detects the control unit types.
  2. Click on the button Read PIN. On some cars you can select if you want to read the PIN from the engine control unit. Information about Component security is automatically displayed too.
Note: SuperVAG KEY reads PIN and Component security from the engine control unit, so you get only 6 bytes of the component security. You have to get the 7th byte from the existing valid key. It must be done with transponder programmer. Using the procedure Searching of the 7byte of component security.

Get the “precoded” transponder (Tango)

How to get the “precoded” transponder using Tango programmer.
Note: As a raw transponder, the type of TP48W must be used (rewriteable).
Select transponder type: MEGAMOS 48
Read the valid ID from the valid key (transponder) using button R, the valid ID is displayed in the left bottom rectangle (Word 3-2). See the picture.
Write down this ID on the paper.
  example of Transpoder ID: In the left bottom rectangle (Word 3-2), the bytes B4 03 2E AD   2. Using button Search Comp Tool find the 7th byte of component security (button Write Comp Sec in the picture above).
Write down all 7 bytes of component security on the paper.
  3. Insert new TP48w transponder to the Tango programmer, press read.
Rewrite the ID bytes with value you noted on the paper in step 1.
Click on the button Write next to the line with the ID (Word 3-2).   4. Select menu: Tools/Utilities/Image Generators/TP22-25   Select the appropriate producer of the car and write the selection to the transponder (button W).   5. Programm 7 bytes of component security
Select transponder type: MEGAMOS 48
Click on the Button Write Comp Sec.
Enter 7 bytes of component security, select the producer of the car and
write the data to the transponder.  

Get the “precoded” transponder (Miraclone)

How to get the “precoded” transponder using Miraclone programmer.
Note: As a raw transponder, the type of TP48W must be used (rewriteable).
Select transponder type: MEGAMOS 48
Read the valid ID from the valid key (transponder) using button R, the valid ID is displayed in the left bottom rectangle (caption is ID). See the picture.
Write down this ID on the paper.
Example of Transpoder ID: In the red ellipse, the bytes A9 6E 6B 2C   2. Using button Search Comp Tool find the 7th byte of component security.
Write down all 7 bytes of component security on the paper.
  3. Insert new TP48w transponder to the Tango programmer, press read.
Rewrite the ID bytes with value you noted on the paper.
Click on the button Write next to the line with the ID.     4. Select menu: Programmer
In the left window select Megamos Crypto ID 48/VAG CAN and select the producer of the car – VW or Audi or SEAT or Skoda.
Write the selection to the transponder (click on button Transponder).   5. Programm 7 bytes of component security
Select menu Special and click on button VAG Component Security -> ID: 48 6. Enter 7 bytes of component security, select the producer of the car and click on the button with icon of transponder.

Learning the transponder to the car

In this use-case the transponder is known by the car immediately.
You can make the learn process, but it has no reason (The key is cloned, so both are the same).

Supported cars

VW New Beetle 2006 – 2009
SELECT LANGUAGE